Getting a TART Telescope
There are three ways to get your hands on a TART telescope:
- Buy a TART Development Kit — the quickest way to get a working telescope.
- Build your own — using open design files for the electronics and the antenna array support structure.
- Join a workshop — hands-on sessions where you build and take home a TART.
1. Get a TART Development Kit
The TART Development Kit contains all the electronics you need for a complete TART telescope: the motherboard, 24 radio receivers on six radio modules, the correlator, a single-board computer, the power supply, co-ax cables, and the enclosure. Kits are assembled and tested before shipping.
Development kits are available for purchase from the Electronics Research Foundation. To order a kit, contact Tim Molteno.
- A fully assembled and tested kit (electronics including correlator, single board computer and antennas) costs ~EUR 3500, not including freight.
- A flat-pack CNC machined antenna array mounting kit will also be made available.
The kit also needs a set of 24 antennas and ground planes, and an antenna array support structure to hold the antennas in place.
2. Build Your Own Antenna Array Support Structure
The TART array structure holds the 24 antennas in known positions on a spiral, which is key to the telescope's imaging performance. Design files are freely available in the TART array-structure GitHub repository, including FreeCAD (.FCStd) models and dxf files that can be CNC or laser cut from sheets of plywood.
Communities around the world have built their own variants — from plywood to truss-tube steel designs. See the Antenna Array page for details of the design files, and the TART blog for examples such as the Bangladesh install and Kenya install.
To assemble the full telescope, you'll also need the electronics and single-board computer installation instructions.
3. Attend a TART Workshop
The TART team runs workshops where participants build and install TART telescopes — often taking one home with them. Past workshops have been held in Mauritius, Kenya, Botswana, and Zambia. Upcoming workshops and video conference sessions are listed on the TART project calendar. See Getting in Touch to join the community and hear about the next event.
Get Help and Get Involved
- Getting in Touch — Telegram chat, bi-weekly video calls, and the events calendar.
- TART Map — see live TART telescopes around the world.
- Hardware overview and installation guide for full setup details.
The TART is a project run by the Electronics Research Foundation in New Zealand. The primary contact for the TART team is Tim Molteno: tim_at_elec_dot_ac_nz.